Directory image of TDC (ABERDEEN) LTD

TDC (ABERDEEN) LTD

5 Bankhead Ind. Estate, Bankhead Avenue, Bucksburn, Aberdeen, Aberdeenshire, AB21 9ET, United Kingdom

About TDC (ABERDEEN) LTD

Electrical / Mechanical / Electronic Engineering. TDC’ s Electric Motor and Generator facility has been purposely designed to accommodate the repair, rewind and refurbishment of a wide range of rotating equipment, including AC and DC motors up to 5MW. Having been at the core of the oil gas industry for over 50 years, TDC are proven specialists in the repair of Ex motors and associated control equipment.

TDC is proud to have been awarded the following certification for all services, repairs and rotating equipment refurbishments:

- Hazardous Area Equipment Repair Overhaul Specialists
- IECEx Certified Service Facility IECEx BAS S0008
- SGS BASEEFA Licenced 08RLS0153
- Underwriter Laboratories (UL) Accredited E200160
- ISO 9001:2015 Quality Management System
- ISO 45001:2018 Occupational Health Safety Management System
- ISO 14001:2015 Environmental Management System

To help maintain a superior level of quality and reliability, TDC has adopted a policy of minimising the use of 3rd party contractors. Evolving over 20 years, TDC has established 15 individual business units and associated companies who can offer clients a wider range of electrical, mechanical and electronic engineering services.

Information regarding each of these specialist divisions can be found on our company’ s websites below, or alternatively, contact John Douglas or Karen McNeil at TDC for further details.

**Electric Motors Generators **

- Repair and Overhaul.
- Eddy Current Brakes, Traction Motors. In-Situ Generator Overhauls. Onshore/Offshore

- Electrical Maintenance Repair.
- Ex Inspections, Installations, Fault Finding. HV/MV/LV Cable Jointing and Terminating. Onshore/Offshore

- Mechanical Maintenance Repair.
- Dynamic Balancing, Vibration Analysis, Laser Alignment. Pump Gearbox Overhauls. Onshore/Offshore

- Condition Monitoring
- HV Partial Discharge Analysis (PD)
- Motor Current Signature Analysis (MCSA),
- Thermographic Surveys
- Primary/Secondary Current Injection Testing
- Onshore/Offshore


**Engineering **

- Fully equipped Machine Shop facilities
- Quality Coatings NACE and ICORR Specialist Blasting Painting facilities


**Hazardous Area **

- Manufacture of ATEX / IECEx Starter Panels and Control Equipment

- Calibration
- Fully equipped UKAS registered Calibration laboratory (0819). Test and Measurement Equipment Hire Sales

- Marine Electronics
- Repair, Service, and Supply most types of Radars Gyro’ s.
- Class Approved Radio Surveys and Voyage Data Recorder annual performance testing


**Electrical and Mechanical Supplies **

- Electric Motors and all types of Electrical Mechanical Products


**FoxAir **

- Compressor Repairs, Service and Sales. Air Products and Starters www.foxairaberdeen.co.uk


**Deebridge Electrical **(associated company)

- Electric Motor, Generator Repairs and Rewinds.
- HVAC Refurbishment Specialists with full test facilities available
- www.deebridgeelectrical.co.uk


**MCI **(associated company)

- Manufacture all types of Switchboards, MCC’ s, Distribution Panels and Control Equipment.
- ATEX / IECEx SIRA Approved.
- Circuit Breaker Repair and Retrofit. Onshore/Offshore
- www.mci-electro.co.uk


** Cruickshanks **

- Manufacturers of Specialist Bespoke Control Panels and Distribution Boards for Network Utility Companies


**Antares TDC **

- Specialist Design and Build of Auxiliary Electrical Power Equipment for Motor Vehicles and Off-Grid Power Solutions.
- Military, Defence Emergency Vehicle markets
- www.antares.co.uk

- For further information about our services please contact +44 (0) 1224 710077 or visit www.TDCaberdeen.co.uk

References

Certificates
UL ISO 9001 Quality System AEMT Ex Course IEC Ex Service Centre AEMT Ex Registered Repairer
In-house services
Ex Hazardous Area Repairs Gearbox Repairs and Service Balancing of Rotating Parts 24/7 Working LV Motor Analysis Condition Monitoring Alternator/Generator Repairs and Service Marine Repairs and Service Impellor Balancing Machining Workshop Laser Alignment HV Motor Analysis
Products for sale
High Voltage Motors (HV) Electric Motors Gearboxes Switchgear Borehole Pumps Medium Voltage Motors (MV) Generators Drives & Inverters Panels Low Voltage Motors (LV) Starters Submersible Pumps Traction Motors Centrifugal Pumps DC Motors Surface Pumps
Approved repairer of
CMG Caprari Mono
Site services offered
Electrical Contractors Removal & Installation

Disclaimer

The information provided on this profile page, including descriptions of services, contacts, and any other details, is for general informational purposes only. This profile is maintained by the respective member of the Association of Electrical and Mechanical Trades (AEMT), and the content herein does not necessarily reflect the views or policies of the AEMT. The AEMT does not guarantee the accuracy, completeness, efficacy, or timeliness of the information contained in this profile. The association is not responsible for any errors or omissions, or for the results obtained from the use of this information. Users of this website are encouraged to independently verify any assertions or information provided herein. The presence of a member's profile on this site does not imply endorsement by the AEMT of the member, their views, or the services they offer. Additionally, the AEMT does not endorse any specific commercial product, process, service, or enterprise that may be mentioned in the profile. This disclaimer is subject to change at any time, and it is the responsibility of the website user to ensure they are informed about any updates. For further information or queries regarding our members or their services, please contact the AEMT directly.

×

Codes of Practice 2025

IMPORTANT:

The AEMT Codes of Pracice are being replaced with our provisional codes of practice at the end of 2025. Members will be asked to demonstrate compliance with these codes by 2027. The Secretariat and Council are preparing for this transition, ensuring members have the support, resources and tools needed to comply.

Find out more