AEMT - Association of Electrical and Mechanical Trades

27 July 2017
Westin Drives refurbished workshop and facilities.
A former textile mill in Huddersfield which played its part in powering the Industrial Revolution is witnessing another revolution. Steve Ashman of Solutions in I.T. spent a day at Westin Drives to discover how it is benefitting from a £1m-plus investment.
Westin Drives presents an attractive blend of old and new.

From the outside, Westin Drives presents an attractive blend of old and new. At its heart is Grove Works, a 19th century former textile mill, whose carefully restored stone facade rises above a new, steel-clad service centre. Inside, its rebirth is expressed in a stylish mix of exposed brick and stone, white walls and contemporary furniture.

This is the new home of the Huddersfield-based electro-mechanical engineering company. A few months ago, as part of a £1m-plus investment, it moved its team, equipment and stock from cramped premises with limited access to this spacious service centre set in a large courtyard.

Westin Drives offers a quality professional rewind and repair service that goes beyond the normal practices of smaller workshops. For example, a full health check on equipment, as a stand-alone item or part of its primary installation, is provided, no matter what the reported issue. A repair by its engineers is not only guaranteed, but meets the highest industry tolerances.

Group managing director Ian Sheppard says: “The last thing customers want is to spend good money for a rewind, only to find that they later have three or four days of lost production through failure of the same component or a related issue. This focus on quality will inevitably be the key to our success.”

When Ian joined Westin Drives six years ago it became apparent there was an increasing need for growth on the technical side of the business. The problem was covering it with existing manpower. That challenge has now been met, enabling the company to expand its range of services to become a one-stop shop for the repair and servicing of industrial machinery and the design and installation of electrical control systems.

Technical Training for customers

To underline its breadth and depth, recent innovations include the establishment of an in-house Precision Engineering department and the provision of technical training courses. As Service Manager, Michael Limb, says: “It certainly simplifies things if you have one port of call when an issue arises.”

Engineers in the technical team offer training to customers to help them recognise why faults occur, understand the benefits of preventative maintenance and enable them to make simple repairs and replacements.

Ian admits to an initial problem with this concept: “I thought, wouldn’t training and skill transfer simply make the customer less reliant on our skills as an engineering firm? - but the opposite is true. By offering a programme of education, you are helping your client to work closely with you. You get to understand their needs in detail and that close working relationship gives the client more reason to want to work with you.”

Oven Facilities

The ground floor offices lead to the airy expanse of the new workshop extension, notable for the two synchronised, ten tonne overhead Street cranes. Here operations are clearly defined. Everything is clean and uncluttered, everything has a place. The goods-in area has storage for small motors; the large motor area, whose floor has been reinforced to accept deliveries, is serviced by the cranes. In the next bay stand two ovens.

The first oven is used for drying parts after they’ve been washed but its main purpose is for stoving a rewind with impregnation resin. Rewound coils need to be hardened when first sited in the motor and prior to it being energised and this is where innovation has taken over. Historically, varnish would have been used for this process, but here Westin Drives chose to change the process, especially when the advantages of using a less toxic, epoxy resin style product are deemed more effective and green friendly. As technical manager Fraser Lynch says: “Resin is more expensive but it’s easier to use and safer on the environment: decisions like this will always be made by us.”

Next is the burn out oven, a simple and clean way of removing old insulation, varnish, epoxy, paint and other organic material before the repair takes place.

The oven can operate at at 360C to 370C degrees – enough to remove varnish and enamel from the copper without damaging the stator laminations or the dielectric.

Before today’s strict environmental laws, a naked flame would be used for this process, risking damage to the motor’s efficiency. After eight hours of heating and cooling the majority of the motor is placed in a parts washer, an aqueous, non-toxic washing machine that automates the final element of cleaning, allowing technical labour to be used more efficiently elsewhere.

Rewind Facilities

In the far corner of the service centre stand the rewind machines. They are central to the business and serve the six benches allocated for coil replacement, small repairs and motor building. As part of the company’s commitment to quality and training, each engineer is allocated a complete toolkit and access to a tool wall for all larger communal tools.

Why this investment in personalised tool kits, and are they common in the industry?

Fraser says: “By having the right, good quality tools to hand, you ensure standardisation of working practices and speed. In the past, like so many others, each engineer would gather tools over a period of time in the industry, but 5S showed us that this wasn’t necessarily the right way forward.”

5S is a system of workplace organisation adopted by Westin Drives as part of a culture shift. Designed to improve productivity, safety and quality, it enables teams to organise the workplace in the most efficient way and its ultimate purpose is to increase customer satisfaction.

The testing area and spray bay complete the circle of repair, an enclosed area incorporating a balancing machine, a cast flat floor for securing the motor under strict tolerances and a range of electrical circuits and specialist cabling enabling the connection of DC and AC motors from the very small to 100’s of kW on a variable 400Hz circuit.

Stock Holdings

Returning to the mill building, we find a store between the technical services room and the machine shop. Here, everything is boxed and ordered neatly on clearly labelled shelves – more evidence of the beneficial influence of 5S. This sizeable stockholding allows engineers to respond to instant demand to get customers up and running as quickly as possible: further evidence of the one-stop shop ethos.

Long standing relationships with WEG for electric motors, Lenze for control systems and SKF for bearings ensure the availability of quality products. These suppliers also bring more than simple distribution opportunities. Each provides accredited engineering programmes to complement the business and its aspirations for quality, all to be documented in ISO9001 and ISO15000, so customers can be assured that work is carried out to the highest standards.

Precision Engineering Shop

The precision engineering shop is a new addition. As I enter, Matt Phillips, the specialist mechanical engineer, is coating a spindle with metal spray, an impressive process of replacing worn metal with super-heated powder, allowing the item to be returned to its original specification. This is just one modern method of restoration, for the machine shop has the capability to manufacture parts from scratch ensuring a swift turnaround.

The latest arrival to ensure this capability is a CNC milling machine, the XYZ 1020 VMC, which has the capacity to produce much of the work that was previously contracted out. One recent job involved creating an end shield for a motor and various shafts lost to abusive wear. It was turned on the lathe and the key slot was CNC milled to precise measurements, a complex task completed in a short time.

Matt says that detailed drawings are not necessarily required. Customers can come to discuss their needs and have drawings made electronically, or an item can be replicated from the original. In the matter of tolerances, the CNC is programmed to produce the highest specification – three decimal places variation – as laid down in the SKF Rebuilder Accreditation.

Customer Service

While technical and managerial innovation are fundamental to this company, perhaps its most conspicuous attribute is the attitude to service. Michael Limb says: “Our high quality of customer service is key to Westin. That’s what customers want, somebody who is interested in solving their problems, minimising their downtime. The biggest buzz you get is when you fix something. Everybody in the business wins, if you can capture that feeling.”

Michael is proud of his team and of the work they do and of the general enthusiasm about the place. He believes that understanding customers, and being able to deliver what they want when they want it, is the priority. Honest communication is also valued. “If there is something we can’t do, we should not be shy to tell our customers that,’ he says. Honesty gives the customer the chance to plan around the issues. Honesty and accuracy are very important.”

Fraser, a hands-on technical manager, is a time-served apprentice who started with Westin Drives at 16. He began his career with seven months of full-time study at KITS, a training centre in Brighouse, as he worked through his NVQ’s 1, 2 & 3. This led to day release while working towards an ONC in Electrical and Electronic Engineering, before achieving HNC standard, which he describes as really hard study work and assessments. Finally, after two years of Industrial Measurement and Control at degree level, he achieved a B.Eng from Huddersfield University. The person I see today is a confident manager, charged with purpose and ability.

Does Fraser regard the modern apprenticeship as the way forward?

It seems the circle of training life has already been initiated. A young engineer, Connor Earnshaw, is following a similar route and has shown an aptitude for electrical maintenance which suits the testing and condition monitoring department, an important element of this company. Harry Stansfield is serving his apprenticeship in the workshop and has been with the company for two years and an additional apprentice was due to start in July.

The Westin approach to quality repairs is to offer the customer an insight into the working life of the equipment from every angle. Reported problems are not always the root cause of failure and additional downtime for supplementary repair can aggravate a working relationship. Again, this is where innovation and investment meet to broaden the scope of potential issues that can be investigated.

Predictive Maintenance

The company has spent heavily on predictive maintenance equipment for condition monitoring, vibration analysis, thermographic heat source monitoring, coil wear sensors and precision measuring devices. These items can be used before dismantling or repair to identify faults that may cause immediate damage, future failure, or affect the efficiency of a unit. Being open and honest allows engineers to make the right decision for the client and the life cycle of the equipment.

As part of the SKF accreditation and preferred working practices, Westin Drives customers are assured of far higher achieved tolerances on all repairs, as measurements are made to three decimal places (three millionths of an inch). Fraser insists that when a bearing housing is measured, the position of the shaft and alignment in the piece are guaranteed, ensuring longer and more efficient running time post repair. This is not an industry standard. Previous poor quality workmanship in jobs that arrive at the service centre is instantly noted as in the past repairs by smaller operations have led to premature failure. Cheap, warns Fraser, is not always cheerful.

Westin Drives brings a fresh approach to the industry. Operating from a 21st century service centre attached to a 19th century mill, it combines the best of innovation and tradition. With a laser focus on the customer, it has shed the old mentality of the engineering world to present a bold approach to problem solving. And with capabilities and a drive for quality well above the industry standard, the future of this old spinning and weaving mill is once again assured.

Associated Download:
Westin Drives.pdf

Media

In this story: Westin Drives Ltd
Grove Works St Andrews Road , Huddersfield, HD1 6NA, England
01484 453399
More News from the AEMT
AEMT News
26 June 2020
As the use of premium efficiency (IE3) motors has increased, due in part to strengthened regulation, the question of maintaining motor efficiency after a rewind process has reappeared. The most recent study, conducted in 2019, by AEMT and EASA has again used independent testing facilities and revealed that even these higher efficiency units are unaffected by a repair using good practice procedures. Karl Metcalfe, Technical Support at AEMT, looks at the latest report and the procedures that were used to support these findings.
AEMT News
28 May 2020
Thomas Marks, editor of the Journal Magazine, and Secretary of the AEMT reveals the next evolution of the trade magazine:
AEMT News
28 May 2020
As with many organisations, the AEMT took the action of postponing all of 2020’s Ex training courses until later in the year, when it is hoped the worst of the Coronavirus will be over. While it is still uncertain whether classroom placed learning will take place, online assessments could be made available so that engineers can still be certified to have been assessed by the AEMT to be able to repair Ex equipment to standard.

Twitter Feed

News: Westin Drives refurbished workshop and facilities.