1. You are here:
  2. Welcome to the AEMT!
  3. Member Directories
  4. Full Member directory
  5. ELEKTRO SERVE (M) SDN BHD (HQ)
Directory image of ELEKTRO SERVE (M) SDN BHD (HQ)

ELEKTRO SERVE (M) SDN BHD (HQ)

P T 18880, Industry Park & Technology Paka, 23100 Dungun, Terengganu, 23100, Malaysia

About ELEKTRO SERVE (M) SDN BHD (HQ)

Celebrating our 30th anniversary, Elektro Serve has been servicing Electro-Mechanical equipment since then in several industries such as Oil and Gas, Power, Transport, petrochemical and a lot of others.


In 2020 we made a tremendous upgrade in our facilities with a USD 2 million investment to be able to keep our equipment at the cutting edge of last technologies and standards.


Our coil manufacturing facility has been expanded by doubling the space and new machines arrived, our mechanical workshop has received 3 CNC machines able to handle rotors up to 30 tons, our VPI plant has been upgraded to be able to pressurize with Nitrogen, a new a bigger burnoff oven arrived, and our testing facility has been upgraded to reach 2.2 MW of load testing capacity.


We have opened also 2 new branches, one in Indonesia and one in Kazakhstan. 2021 for us is “Embarking the world”.

References

Certificates
ISO 14001 Environmental Management ISO 9001 Quality System IEC Ex Service Centre ISO 18001 Health & Safety
In-house services
Vibration Analysis Pump Submerged Test Servo Motor Repairs and Service Ex Hazardous Area Repairs Traction Motor Repairs and Service Handle < 1 Tonne Gearbox Repairs and Service Balancing of Rotating Parts 24/7 Working Alternator/Generator Repairs and Service Transformer Repairs and Service Marine Repairs and Service Pump Pressure Test Rewind of Medium Voltage Rewind of Low Voltage Handle 6 - 10 Tonne Handle 4 - 5 Tonne Coil Manufacture Handle 1 - 3 Tonne Pump Repairs and Service Rewind of High Voltage Armature Rewinds Drive & Inverter Repairs and Service Collection & Delivery Fabrication Shop Design Engineering 24/7 Call Out Machining Workshop VPI Unit Burn Out Oven Load Testing Handle > 10 Tonne
Products for sale
High Voltage Motors (HV) Servo Motors Seals Motors Spares Gearboxes Switchgear Preformed Coils Medium Voltage Motors (MV) Drives & Inverters Panels Brakes Low Voltage Motors (LV) Starters Submersible Pumps DC Motors Bearings Surface Pumps Transformers
Approved repairer of
Laurence Scott Mitsubishi Jeumont Electric Caterpillar Schneider Electric SI Partner Toshiba INDAR submersible pumps TMEIC Helmke
Approved distributor of
Jeumont Electric INDAR submersible pumps Helmke
Site services offered
Condition Monitoring (Remote) On site repairs & maintenance Laser Alignment Site Surveys On Site Balancing Thermography Condition Monitoring (Onsite) Alternator/Generator Hire Removal & Installation

Contact Information

Login is required to view contacts

Login / Register

Disclaimer

This profile is provided for general information only and is maintained by the AEMT member. The Association of Electrical and Mechanical Trades (AEMT) does not guarantee the accuracy or completeness of the information shown. Where a member is shown as Compliant, or Verified, this reflects their status against the AEMT Codes of Practice at the time of assessment. Verified status means the Service Facility has had an onsite visit from an AEMT Auditor to confirm that the information presented and the facility’s processes align with the AEMT Codes of Practice. It does not guarantee performance or outcomes for any specific job. Listing on this website, including Verified status, does not imply endorsement by the AEMT of the member, their services, or any products they may supply. Users should always carry out their own checks before engaging a service provider. For further information about AEMT membership or verification, please contact the AEMT.

Return to listing